DigiDesign 96i I/O Manual - Page 10

Browse online or download pdf Manual for I/O Systems DigiDesign 96i I/O. DigiDesign 96i I/O 20 pages. 16-input, 2-output digital audio interface features 24-bit analog-to-digital (a/d) and digital-to-analog (d/a) converters
Also for DigiDesign 96i I/O: Quick Manual (13 pages), Manual (16 pages)

Print Page

Sync Mode LEDs

The SYNC MODE LEDs indicate the current

Pro Tools Clock Source and Sync mode. Choices

include the following:

INT (Internal) Indicates the 96i I/O is the

Pro Tools clock master.

DIG (Digital) Indicates the 96i I/O S/PDIF port is

providing master clock to Pro Tools.

LOOP (Loop Sync) Indicates 96i I/O is in Loop

Slave mode, and is clocking to the current Loop

Master device. See also "Loop Master LED" on

page 5.

EXT (External) Indicates the 96i I/O EXT

CLOCK IN port is providing master clock to

Pro Tools.

For more information, see the Getting Started

with HD Guide.

Input and Output LEDs and Meters

16 sets of four-segment LEDs indicate signal

level for each of the 96i I/O input channels.

These LEDs are calibrated at –42 dB, –18 dB,

–6 dB, and 0 dB, respectively, referenced to Full

Scale digital.

Full Scale digital (0 dBFS) does not always

indicate signal clipping levels; please use the

on-screen meters in Pro Tools to determine

whether a signal is clipping. For more infor-

mation, see the Getting Started Guide with

HD Guide.

Two additional LEDs, located to the left of the

meters, indicate whether the meters display in-

put or output levels; the meters indicate input

levels by default, and can be switched from

within the Hardware Setup dialog in Pro Tools.

96i I/O Guide