Epson AcuLaser CX11N User Manual - Page 14

Browse online or download pdf User Manual for Printer Epson AcuLaser CX11N. Epson AcuLaser CX11N 17 pages. Multi-function colour laser printers
Also for Epson AcuLaser CX11N: Basic Operation Gude (26 pages), Specifications (4 pages), Setup Manual (32 pages), Start Here Manual (8 pages), Supplementary Manual (6 pages), Update (1 pages), Product Support Bulletin (5 pages), Specifications (4 pages)

Print Page

Epson AcuLaser CX11N/CX11NF

Caution:

Do not touch the belt on the top of the photoconductor or the

blue area; otherwise, print quality may decrease.

Avoid exposing the photoconductor to light any longer than

necessary.

Do not touch any other components inside the CX11N.

9. Hold the photoconductor by its handle and insert it into

the slots marked with blue arrows inside the CX11N. Push

it in until it clicks into place.

Warning:

Be careful not to touch the fuser, which is marked CAUTION

HIGH TEMPERATURE. If you have been using the CX11N

recently, the fuser may be very hot.

10. Flip down the orange lever, then close cover B.

11. Slide out and flip open the output tray extension, if

necessary.

Epson AcuLaser CX11N/CX11NF

12. Slowly push down the scanner to its original position.

Cleaning the CX11N

If the CX11N's outer case is dirty or dusty, turn off the

CX11N and clean it with a soft cloth moistened with mild

detergent.

Caution:

Never use alcohol or paint thinner to clean the CX11N; these

chemicals can damage the components and the case. Be careful not

to get water on the CX11N mechanisms or any electrical

components.

To clean other parts of the CX11N, see these sections:

❏ "Cleaning the Pickup Roller" (below)

❏ "Cleaning the Print Head" on page 15

❏ "Cleaning the Exposure Window and Document Table" on

page 15

❏ "Cleaning the ADF Pickup Rollers (CX11NF Only)" on

page 16

1. Make sure the CX11N is turned off and that the power cord

is not plugged into an outlet.

2. Open the MP tray cover and remove any loaded paper.

8/05