Epson C11C418001 - Stylus C60 Inkjet Printer User Manual - Page 8
Browse online or download pdf User Manual for Printer Epson C11C418001 - Stylus C60 Inkjet Printer. Epson C11C418001 - Stylus C60 Inkjet Printer 11 pages. Ink jet printer
Also for Epson C11C418001 - Stylus C60 Inkjet Printer: Read This First Manual (12 pages), Start Here (4 pages), Specifications (2 pages), Declaration Of Conformity (2 pages)
Print Page
EPSON Stylus C60
Aligning the Print Head
If your printouts contain misaligned vertical lines, you may
need to align the print head. Your printer must be connected
directly to your computer (not on a network), to use the Print
Head Alignment utility.
1. Make sure the printer is turned on, but not printing, and
letter-size plain paper (not special ink jet paper) is loaded.
Load paper that's at least 8.27 inches (210 mm) wide to
prevent ink from spraying inside the printer and smudging
your printouts.
2. Do one of the following:
❏ Windows: right-click the
the right side of the Windows taskbar. Then click
.
Head Alignment
❏ Macintosh: Open the File menu and choose
or
. Click the
Setup
Print
the
Print Head Alignment
3. Follow the instructions on the screen to print a test page.
You see the alignment window.
4. On the printed page, select the pattern that shows the two
vertical lines most precisely printed on top of each other.
You may need to use a magnifying glass.
Select one pattern each for rows 1, 2, and 3. Then enter
the number of the best pattern for each row in the
corresponding boxes on the screen.
5. Click
to print another test page. Make sure
Realignment
the pattern numbered 8 in each row is the best aligned. If
not, repeat steps 4 and 5.
6. When you're finished, click
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year.
1. Turn off the printer, unplug the power cord, and
disconnect the printer cable.
2. Remove all paper, then use a soft brush to clean any dust or
dirt from the sheet feeder.
3. Clean the exterior of the printer with a soft, damp cloth.
EPSON Stylus C60
8 -
Status Monitor 3 icon on
Print
Page
button, then click
Utility
button.
.
Finish
4. Clean ink out of the printer's interior with a soft, damp
cloth.
Clean
here
Don't touch the carriage shaft.
Don't touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don't get water on the printer components and don't
spray lubricants or oils inside the printer.
Don't use any cleaning sheets included with special
paper; they may jam inside the printer.
Transporting the Printer
If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after
installing the printer in its new location.
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
7/01
Don't touch the carriage shaft
Tape the ink
cartridge holder to
the printer case