Archers Sleepcentre ISABELLA BED Assembly Instructions - Page 2
Browse online or download pdf Assembly Instructions for Indoor Furnishing Archers Sleepcentre ISABELLA BED. Archers Sleepcentre ISABELLA BED 4 pages.
READ CAREFULLY
·
Please keep the original packaging until the item is
fully assembled and in place. in the unlikely event
that you need to return your product, it must be
returned in its original packaging to avoid further
damage failure to comply to these procedure,no
returns will be accepted
REFERENCE
·
Due to the size of this product we recommend that
it is assembled in the room intended for use.
·
When you are ready to start, make sure that you
have the right tools.plenty of space and a clean
floor to prevent it from scratching.
·
Check the pack and make sure you have all the
parts listed.
Ensure that this items is fully assembled and
secured asillustrated before use.
Check all screws and bolts are tightened and
inspect regularly
This product should only be used on firm,level
ground.
Information
·
Please dismantle for transportation
·
Tools not included.
·
Do not destroy the packing until after the frame is
fully assembled,we will not accept any bed for
return unless packed in its original packaging.
WARNINGS
·
Keep small parts out of reach of children.
·
Make sure the legs remain in contact with the
ground.
Important Information
·
Do not use power tools to construct this product.
·
Do not tighten screws until fully assembled.
·
Do not over tighten screws or bolts.
·
Do not use this product if parts are missing,
damaged or worn.
·
Do not stand on the product.
IF THIS PRODUCT IS GOING TO BE USED ON A
WOOD , LAMINATE OR TILED FLOOR , YOU MUST
APPLY " ANTI SLIP PADS " TO ALL LEGS TOUCHING
THE FLOOR .
THESE ARE AVAILABLE TO BUY IN MOST
HARDWARE SHOPS IN A FELT MATERIAL OR
RUBBER AND ARE RELATIVELY INEXPENSIVE .
THE PADS WILL PROTECT YOUR FLOOR FROM ANY
MARKING AND ALSO FROM SLIPPING .
FAILURE TO APPLY THE PADS WILL RESULT IN NO
RETURNS OF THE PRODUCT AND ANY SPARE'S
REQUESTED .
CARE INSTRUCTIONS
·
Never use scourers, abrasives or chemical
cleaners.
·
To clean wipe with a sponge and warm soapy
water. Do not use solvent based cleaners or
detergents as they can bleach or damage the
product.
·
F
or soft fabric beds vacuum or brush with a soft
brush on a regular basis to take away grit and
dust. spot clean with a clean damp cloth with no
cleaning agents.
Page 2 of 4