AYC Perla Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Pedicure Spa AYC Perla. AYC Perla 10 pages.

Print Page

Receipt & Inspection

Thoroughly inspect each shipment immediately upon arrival. It is important that you

notify the delivery driver of any damage and insist on a notation directly on the face

of the freight bill. Failure to note damage on the face of the freight bill may impede

and/or prevent any claims that you may have against the carrier.

If concealed loss or damage is found, you must notify the carrier at once and request

an inspection. DO NOT DISCARD THE SHIPPING CARTON. If you give the carrier a

clear receipt for goods that have been damaged in transit, you do so at your own risk

and expense.

To reduce the risk of electric shock, proper grounding is required for the chair. This

item is equipped with a grounded plug; insert the grounded plug into a grounded

socket with proper installation and suitable local voltage.

Dangerous!

Incorrect grounding may cause electrical shock. If you have any questions about this

item, please consult a licensed electrician. If the plug sent along with the chair does

not match your socket, please do not modify the socket. Ask technicians to install a

suitable one. Modification from the original manufactured specifications will void all

warranties expressed or implied. Please do not use a plug adapter.

In cases of an electrical shortage the fuse may burn out. The user can open the fuse

cap with a screw driver and replace it with an appropriate fuse and put the fuse cap

back on. If there are any questions please consult a licensed electrician.

AYC Group requires that you contact a local, qualified plumber to install your new

AYC Group pedicure spa. It cannot operate properly or safely unless it is provided

with adequate electrical power, sufficient water pressure, proper water temperature

and the required drain facilities. Information on these important subjects is

contained in this manual. We urge you to read it carefully to make sure these

requirements are met.

1. Excessive water temperature is dangerous and should be checked before use.

Maximum operating water temperature should not exceed 100 F˚ (38 C˚) and the

maximum supply water temperature should not exceed 125 F˚ (65 C˚).

2. Always enter and exit the pedicure spa slowly and carefully.

3. Never bring and/or operate any electrical devices into or near the spa.

4. Do not stand in the whirlpool tub!