Epson DFX-5000+ Manual - Page 3

Browse online or download pdf Manual for Printer Epson DFX-5000+. Epson DFX-5000+ 8 pages. Product support bulletin(s)
Also for Epson DFX-5000+: Brochure & Specs (24 pages), Product Support Bulletin (20 pages), Product Support Bulletin (3 pages), Product Information (5 pages), Product Support Bulletin (5 pages), Product Support Bulletin (3 pages), Product Support Bulletin (20 pages), Product Support Bulletin (14 pages), Product Support Bulletin (25 pages), Product Support Bulletin (16 pages), Product Support Bulletin (8 pages), Product Support Bulletin (2 pages)

Epson DFX-5000+ Manual
Labels
Labels should be securely attached to
the backing sheet.
The backing sheet should be covered
with the label material, both in the label
area and in the spaces between labels.
(The backing sheet should not be
exposed.)
The corners of the labels should be
rounded.
The label surface should be flat.
Mechanical
Paper feed
Push tractor (front and rear)
methods:
Push-pull feed with optional pull tractor
Ribbon:
Cartridge ribbon, available in black only
(#8766). Do not use ribbons for 24-pin
printers. Life expectancy is 15 million
characters (at 14 dots/character).
MCBF:
For all components excluding print head
and ribbon: 24,000,000 lines
MTBF:
8000 power-on hours (25% duty)
Running the printer continuously for
extended periods of time is not
recommended. It can cause the printer to
wear out sooner than expected.
Print head life:
300 million characters at 14 dots per
character
Dimensions
Height:
and weight:
Width:
Depth:
Weight:
Electrical
Rated voltage
AC 120 V
Input voltage
AC 103.5 to 132 V
range
Rated
50 to 60 Hz
frequency range
Input frequency
49.5 to 60.5 Hz
range
Rated current
5.0 A
Power
Approx. 115 W (during self-test printing in
consumption
draft mode at 10 cpi)
369 mm (14.5 inches)
700 mm (27.6 inches)
382 mm (15.0 inches)
29 kg (approx. 64 lb)
Environmental
Temperature:
Humidity:
Safety approvals
Safety
standards:
R.F.I.:
,QWHUIDFHý6SHFLILFDWLRQVý
The DFX-5000+ has a built-in parallel and serial interface.
The parallel interface is an 8-bit, TTL-compatible signal.
The serial interface is an RS-232C asynchronous interface
with the following characteristics:
Data format:
Signal level:
Handshaking:
Bit rate:
Connector plug:
Connector pin assignments for the serial interface and a
description of their respective interface signals are shown in
the table below.
6LJQDOýSLQ
6LJQDO
ì
)*
ë
7;'
ê
5;'
éðç
1&
æ
6*
åðìí
1&
ììñýëí
'75
ìëðìä
1&
ëìðëè
1&
The column heading "Direction" refers to the direction of
signal flow from the printer.
êîìèîäé
(3621ý');ðèíííò
Operation: 5°C to 35°C (41°F to 95°F)
Storage:
30°C to 65°C ( 22°F to 150°F)
Operation: 10% to 80% RH without
condensation
Storage:
5% to 85% RH without
condensation
UL1950 with D3, CSA22.2 #950 with D3
FCC Part 15 Subpart B class B
1 start bit
Data word length: 8 bits
Odd, even, or no parity
1 or more stop bits
Mark logical "1" ( 3 V to 27 V)
Space logical "0" (+3 V to +27 V)
Handshaking by DTR signal or
XON/XOFF.
300, 1200, 9600, 19200 bps
EIA 25-pin connector
'LUHFWLRQ
'HVFULSWLRQ
¥
&KDVVLVýJURXQG
287
7UDQVPLWVýGDWDýIRUý;21î;2))
,1
5HFHLYHVýGDWD
¥
1RWýFRQQHFWHG
¥
6LJQDOýJURXQG
¥
1RWýFRQQHFWHG
287
,QGLFDWHVýZKHWKHUýRUýQRWýWKHýSULQWHU
LVýUHDG\ýWRýUHFHLYHýLQSXWýGDWDïý,IýGDWD
LQSXWýLVýQRWýUHDG\ñý'75ý ý¦0$5.§ï
¥
1RWýFRQQHFWHG
¥
1RWýFRQQHFWHG
(3621ý');ðèíííòýðýê