Architectural Mailboxes Oasis Eclipse Instructions

Browse online or download pdf Instructions for Outdoor Furnishing Architectural Mailboxes Oasis Eclipse. Architectural Mailboxes Oasis Eclipse 2 pages. Mailbox

Print Page

Oasis Eclipse Mailbox (Model 6400) Instructions

If you have any questions about how to mount or use this mailbox, or if you need any replacement parts, please call

us directly at (310) 374-5700 or contact us at [email protected].

Mounting Instructions

Your new mailbox comes completely assembled. To begin using your mailbox, it must be properly mounted in accordance

with USPS requirements to facilitate carrier access, described below. You can mount your mailbox on one of the optional

mailbox posts we offer (sold separately), or you can mount it to a wooden post using the optional 4X4 Adapter (item

7540B-10; also sold separately).

CUSTOMERS ARE REQUIRED TO CONTACT THE LOCAL POST OFFICE BEFORE INSTALLING THE MAILBOX TO

ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT THE STREET. GENERALLY, MAILBOXES ARE INSTALLED AT

A HEIGHT OF 41-45 INCHES FROM THE ROAD SURFACE TO INSIDE FLOOR OF THE MAILBOX OR POINT OF MAIL

ENTRY (LOCKED DESIGNS) AND ARE SET BACK 6-8 INCHES FROM THE FRONT FACE OF CURB OR ROAD EDGE

TO THE MAILBOX DOOR.

For 3" Round In-ground Post (item 7507 or 7516) or Standard In-ground Post (item 5105 or 5525): Dig a hole

deep enough to allow the box to sit at the specified height, as required by your local post office. The height from

the road level to the mailbox floor is typically between 41 and 45 inches. Make sure the hole is set back from the

road such that the distance from the curb or the road edge to the mailbox face meets local post office

requirements, typically between 6 and 8 inches.

For Standard Surface Mount Post item 5526: If using j-bolts, dig a hole deep enough to properly support the box

(about 18") and to allow the box to sit at the specified height. If using concrete anchors in preexisting concrete,

make sure the anchor positions allow the box to sit at the specified height. Also, make sure the bolt or anchor

positions allow for the specified set-back, typically 6 to 8 inches from curb.

Height per local post

office, typically between

41 and 45 inches to floor.

Set back per local post office,

typically between 6 and 8 inches.

For 3" Round In-ground Post (item 7507 or 7516), or Standard Posts (items 5105, 5525

or 5526): Attach the mailbox to the post using the hardware included with the post.

Note - If you are using a mounting method other than one of our optional post (items

5105, 5525, 5526, 7507 or 7516): The mailbox has mounting bolt patterns on the bottom

that are designed to provide adequate mounting strength and stability for long term use. Do

not drill new mounting holes into the mailbox floor. Instead, create a bracket to attach the

mailbox to the post using the existing holes in the mailbox floor. Drilling new holes or

modifying the mailbox in any way may compromise the function, strength or corrosion

resistance of the product, and void the warranty.

Attach the mailbox to the

post using the hardware

included with the post.

NOTE: The mounting hardware

to attach this mailbox to your

existing post or to a post from

another manufacturer is not

included. Compatible mounting

hardware is included with all

Architectural Mailboxes posts,

For 3" Round In-ground Post (item 7507 or 7516) or

Standard In-ground Post (item 5105 or 5525): Pour the

concrete (at least 1 cubic foot recommended) completely

around the post, making sure the post and mailbox are

level and correctly positioned according to your local post

office.

For Standard Surface Mount Post (item 5526): Pour

concrete around j-bolts held in the correct pattern, or install

anchors in the correct pattern into dry concrete.

www.architecturalmailboxes.com (310) 374-5700

sold separately.

Rev. A