Digiflex CM430 Installer's Reference Manual - Page 2

Browse online or download pdf Installer's Reference Manual for Media Converter Digiflex CM430. Digiflex CM430 6 pages. Rs485 lan to ethernet convertor module

Print Page
CM430 - RS485 LAN To Ethernet
The CM430 allows you to extend the control panels RS485 LAN.
Table 1: shows the panel and panel firmware which are compatable with the CM430 converter module.
MENU 7-7-0, Option 5 (Extend LAN Fail) must be set when using the CM430.
LED Status
The following LED indicators are provided on the CM430 module.
LED
POWER
LINK
100M
DATA
Initial Setup
Using a stand alone computer (your PC must have an Ethernet port), you can connect your computer directly to the
CM430 using a crossover Ethernet cable. Otherwise, connect both the computer and CM430 using straight-through
Ethernet cable to a hub or switch.
Quick Setup With Fixed IP
The CM430 has the following default settings.
Page
2
P/N: CM430IRG Rev 1.0
Convertor Module
CM430 Compatibility
Panels Supported
Solution 6000
Table 1: CM430 Compatibility
Colour
Activity
Off
RED
On
Off
RED
On
Off
RED
On
Flashing
Off
On
GREEN
Blinking
Table 2: LED Indicators
Option
IP Address
Subnet Mask
Gateway
Primary DNS
Connection Mode
Connection Port Number
Remote Host IP Address
Table 3: Quick Setup With Fixed IP
Version
V2.29 or higher
Description
Power OFF
Device Ready
No Ethernet Link
Ethernet Link Established
10 Mbps
100 Mbs
Data Sending/Receiving
No TCP/IP Session Link
TCP/IP Session Link Established
Booting/System Self-Test
Data Sending/Receiving Between Serial and Ethernet
Default Setting
192.168.168.125
255.255.255.0
192.168.168.254
168.95.1.1
TCP Server
5000
0.0.0.0
E&OE
Copyright © 2018