Digiflex CM430S Installer's Reference Manual - Page 2

Browse online or download pdf Installer's Reference Manual for Media Converter Digiflex CM430S. Digiflex CM430S 8 pages. Rs485 lan to ethernet converter module

Print Page

CM430S - RS485 LAN To Ethernet

The CM430S allows you to extend the control panels RS485S LAN across a local network. Table 1: shows the panel

and panel firmware which are compatible with the CM430S converter module. MENU 7-7-0, Option 5 (Extend LAN

Fail) must be set when using the CM430S.

LED Status

The following LED indicators are provided on the CM430S module.

LED

Active

Green / Blue

LINK

Green/Blue

Power

Initial Setup

Using a stand alone computer (your PC must have an Ethernet port), you can connect your computer directly to

the CM430S using a crossover Ethernet cable. Otherwise, connect both the computer and CM430S using straight-

through Ethernet cable to a hub or switch (Ensure computers adapter is set to the same base address, ie: 192.168.1.1,

See page 7 - Windows IP Configuration.).

Quick Setup With Fixed IP

The CM430S has the following default settings.

Page

P/N: CM430SIRG Rev 1.2



Converter Module

CM430S Compatibility

Panels Supported

Solution 6000

Table 1: CM430S Compatibility

MENU 7-7-0, Option 5 (Extend LAN Fail) must be set when

using the CM430S.

Note

Colour

Activity

Blue

Green

Blue

Green

Off

RED

Table 2: LED Indicators

Option

IP Address (Factory)

IP Address (Default Switch)

Subnet Mask

Gateway

Primary DNS

Connection Mode

Connection Port Number

Remote Host IP Address

Table 3: Quick Setup With Fixed IP

Version

V2.29 or higher

Description

Data sent from Ethernet to Serial

Data sent from Serial to Ethernet

Connection Established

Ethernet Cable connected

Power OFF

Power ON

Default Setting

192.168.1.200

192.168.1.254

255.255.255.0

192.168.1.1

192.168.1.3

TCP Server

5000

0.0.0.0

E&OE