Creek Audio EVOLUTION 50A User Instructions - Page 5
Browse online or download pdf User Instructions for Amplifier Creek Audio EVOLUTION 50A. Creek Audio EVOLUTION 50A 8 pages. Integrated amplifier
Also for Creek Audio EVOLUTION 50A: Instruction Manual (13 pages), Instruction Manual (17 pages)
Print Page
stations with a reasonable signal strength and quality encountered during seek will be
memorised and given a Preset number in succession. Auto Preset can be helpful during
initial use of the Tuner or upon moving antenna location to be able to quickly browse
through all the available stations instead of having to seek or tune manually. With all the
available stations residing in Presets, you can simply browse to the station(s) of interest and
store them again into a new preset location of your choice in an order of your choice.
4. To clear all stored Pre-sets (along with all the Receiver preferences), select Factory Defaults
from the SETUP MENU. See details.
RDS (RBDS in the USA) means Radio Data Service or Radio Broadcast Data Service. Most
international FM stations broadcast RDS. If the received signal is strong enough and if the station is
broadcasting RDS data, the OLED display will switch from showing frequency to RDS information.
See further details in the MENU section.
DISPLAY
The EVOLUTION 50A's OLED display shows the following status of the Tuner and Amplifier:
1. Pre-Set station number 01 -99
2. Frequency
3. BAND (FM only with RUBY)
4. RDS
5. Radio metrics show at the top of the display, in a graphical form.
6. Signal strength, is shown as an antenna with a bar graph.
7. Signal Quality, is shown as Q with a bar graph. It is based on a combination of Signal
Strength, Signal-to-Noise Ratio and Multipath distortion.
8. Stereo is displayed in three settings: The Infinity symbol is full width STEREO, two
overlapping circles means partial stereo and a single circle means MONO.
9. PS, means Program Service, indicating that station name is available.
10. RT, means Radio Text is available. Up to 64 characters of textual information about the
station, DJ, music or other information may be transmitted by this method.
11. CT, means Time data is available.
The remote control IR (Infra-Red) sensor is placed at the right hand end of the display window. Do
not block this area of the display or the remote control may not work properly.
Page 5