Digifly Archimede User Manual - Page 8

Browse online or download pdf User Manual for Avionics Display Digifly Archimede. Digifly Archimede 20 pages.

Print Page
3.9

RESTORE FACTORY SETTINGS

To restore the factory settings (default values for all parameters), press and hold down
the
key as you turn vario on. Keep the
SET?" appears, then confirm with "YES" or "NO".
4

DISPLAY SCREENS

The are 2 main display screens on the Digifly Archimede:
- The Basic Display screen.
- The Advanced Display screen.
To switch between these 2 main display screens, press the
4.1

GRAPHIC ALTIMETER

This is a live plot of your altitude against time, it scrolls
whilst you are flying. It will help you to see how
effectively you are climbing or turning in a thermal. It is
especially useful in weak conditions.
The scales on the graphic altimeter can be changed, go
to (M-SET \ n. 13 BARX) and (M-SET \ n. 14 BARY).
4.2

ALTIMETER DISPLAY

The Digifly Archimede has 3 different altimeters: A1, A2, A3.
The altimeters can be shown in metric (mt) or imperial (ft) units. To change the units of
display. Press the
AL)" and change to "FT" or "MT".
On the Basic Display page, the A1 (barometric altimeter) is the first altimeter shown.
BASIC DISPLAY
key, (function "ENT") to select and then select (M-SET \ n. 22 U-
key pressed until a message "FACTORY
ADVANCED DISPLAY
Page 8
key.
GRAPHIC ALTIMETER DISPLAY