Digifly DU8 User Manual - Page 6
Browse online or download pdf User Manual for Monitor Digifly DU8. Digifly DU8 11 pages. Display unit 8 instrumentation
Print Page3.5.2 - Measure units.
There are four presettable measure units:
Temperature (temp. unit)
: °C or °F
Altitude (unit 1)
: mt. or ft.
Speed (unit 2)
: Km/h or MPH or Knots
Pressure (unit 3)
: mb or iHg
3.5.3 - Warnings.
For each in line it is possible to fix minimum and maximum limits not
to be exceeded.
It is possible to preset 11 engine limits (in lines from 1 to 11), and 1 flight
limit (speed) can be preset (minimum speed will be stall speed, maximum
speed will be VNE).
Limits on bar indicators are represented by little arrows on their side,
limits on round instruments are represented by a tally on the scale.
When a preset limit is exceeded the relative warning appears in the
specific window.
At the same time the bar indicator starts blinking.
16
User Manual
2.3.3 - Brightness.
To regulate backlighting press the LIGHT button. Each time the button
is pressed, light will be increased.
2.3.4 - Page toggle.
To toggle pages between Instrumentation and Moving Map pages, press
the MODE button in the main screen.
2.3.5 - Basic functions.
The key
- Allows to enter/exit to/from "Edit Altimeters" mode.
The key
- Allows to switch the centrale window (GPS - Sec. Instruments).
The key
- Allows to activate the recorder.
The key
- Allows to deactivate the recorder.
The keys
- Allow to ( in "Edit Altimeters" mode ) change the current Altimeter.
The key
- Confirm the operation on recorder ( On - Off ).
The key
- Show the main menu' in the center of the screen.
The key
- Allows to (in "Edit Altimeters" mode) clear the QFE.
User Manual
5