Archon Speed Wireless Bike Meter Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Bicycle Accessories Archon Speed Wireless Bike Meter. Archon Speed Wireless Bike Meter 5 pages.
Print Page1.1 Battery Installation and Replacement
a) Use a coin to turn the battery compartment cover counter‐clockwise to unlock position.
b) Insert a new CR2032 battery.
c) Turn the battery compartment cover clockwise to the locked position.
d) Make sure that the cover is securely closed to prevent moisture from entering the battery compartment.
1.2 Sensor and Magnet Installation
Position sensor to the rear chain‐stay with a rubber band. Use two cable ties to loosely attach the sensor
(do not fully tighten).
Attach the crank magnet on the crank and wheel magnet on spoke. Use a screw driver to adjust the speed
sensor position. Make sure the gap between both sensors and magnets is less than 3 mm.
Tighten both cable ties once setup is complete.