Digigram NCX 400 User Manual - Page 3

Browse online or download pdf User Manual for Recording Equipment Digigram NCX 400. Digigram NCX 400 8 pages.

Print Page

AVAILABLE OPTIONS :

NCX can be delivered with one of the following

options

• NCX 200 : 2 mono outputs

• NCX 400 : 4 balanced mono outputs

• NCX 040 : 4 balanced mono inputs (with mic/line

level selection)

• NCX 220 : 2 mono inputs (with mic/line level

selection) and 2 mono outputs

OVERVIEW

• Independent device exchanging digital sound

through Ethernet 803.3 network

• 10 BASE-T Ethernet interface.

• 2 or 4 analog mono outputs and 1 stereo

headphone output (depending on option).

• 4 analog mono inputs (depending on option).

• 7 general purpose inputs/outputs.

• 2 general purpose RS232 links.

SOFTWARE

REQUIREMENTS

• V99.2 np SDK or higher (no PCX cards managed)

• V5.40 np SDK or higher (PCX cards also

managed)

HARDWARE

INSTALLATION

• Install the NCX box in the suitable place,

• Connect the audio input/output,

• Connect the network cable (RJ45)

• Connect the power supply to the NCX box (mini

DIN plug)

• Plug the power supply into the AC supply socket.

SOFTWARE

INSTALLATION

(np DRIVER ONLY)

No driver floppy disk is delivered with the NCX.

Please ask your supplier for an updated driver or

download it from the Digigram Web site.

Make sure that the driver has been approved by your

supplier. Your supplier's application may request

the use of a specific driver.

Please refer to the installation documentation which is

delivered with the driver. It details the installation

procedure to follow under Windows 95/98 and

Windows NT.

NCX

User's Manual