Creo Trendsetter NEWS SA Visual Quick Reference - Page 9

Browse online or download pdf Visual Quick Reference for Printer Creo Trendsetter NEWS SA. Creo Trendsetter NEWS SA 9 pages.

Print Page
Removing a Flyoff
Trendsetter NEWS SA
!
CAUTION: Wear protective
gloves when handling plates.*
CAUTION: If you have an implanted
YELLOW (PANTONE 108C)
cardiac pacemaker, ensure that
CKGROUND AND EXCLAMATION MARK
magnetic clamps are kept more
than 7 cm (2.75 in.) away from the
WARNING!
pacemaker.*
AVERTISSEMENT!
WARNUNG!
STRONG
MAGNETIC
FIELDS
LABEL SIZE: 26.0mm x 31.0mm
CHAMPS
2mm Rad. corners, typ.
MAGNETIQUE
INTENSE
STARKES
MAGNETFELD
74-3260A-A
WHITE BACKGROUND
Rotate the drum to expose
the trailing-edge clamps.
3
ACKGROUND COLORS AS SHOWN
In Print Console, click Resume.
MARK REQUIRED.
8
APPROVED BY
8
* Refer to the Operator Guide for full details.
The device suspends activity.
1
Slide the trailing-edge clamps
off the plate.
4
CREO PRODUCTS LABEL
WARNING STRONG MAGNETIC FIELDS
FABRICATION DRAWING
Reposition the trailing-edge clamps:
9
C
COPYRIGHT CREO PRODUCTS INC.
DESIGNED BY
DRAWN BY
R. LEVASSEUR
a. Align the trailing-edge clamps.
MILLIMETERS
DATE
2000:MAR:14
UNLESS SPECIFIED
PART NO.
REV
74-3260A
A
Open the front panel:
2
a. In Print Console software, unlock
the front panel.
Fold over the corners
of the plate.
5
10 Close the panels:
G. BEST
SIZE
b. Slide the trailing-edge
SCALE
A
1:1
clamps into position.
DOC
SHEET
OF
SP
1
1
Trendsetter NEWS SA
b. Rotate the two latches
and lift the front panel.
Press the leading-edge
clamps to free the plate.
6
a. Pull down the front panel and rotate
the locking latches.
b. Pull down the top panel, and then push on
the two corners to lock the internal latches.
The top panel opens
automatically.
Clean out any debris
left behind.
7
11
In Print Console, click Resume.