Accuris myVolt Touch Operating Manual - Page 6

Browse online or download pdf Operating Manual for Power Supply Accuris myVolt Touch. Accuris myVolt Touch 6 pages. 300v

Print Page

4. Installation

Place the power supply on a

where it will not contact liquids or chemicals.

The myVolt Power Supply features "Dual Orientation"

technology, so it can be placed horizontally or vertically on

the Laboratory bench. The display screen system is

designed to recognize its orientation and the display will

rotate automatically to be right-side-up.

Vertical

Orientation

Connect one end of the included power cord to the

instrument and the other

end to an appropriate electrical

outlet. Check the Rating/Serial # label on the rear of the

power supply for the required electrical input.

smooth, level surface in an area

Horizontal

Orientation

To avoid electrical shock, do not use this product with wet

hands and ensure that all electrical leads being used are

dry. Only use electrical leads that offer sufficient

protective insulation and gel boxes that have appropriate

safety lid systems.

Please carefully read this instruction manual before

operation to avoid any personal injury. Only trained

laboratory personnel should operate the system.

Do not attempt to open or repair the MyVolt Power Supply.

Contact your distributor or Benchmark Scientific for

service.

Always use the MyVolt Power Supply in an environment

with low humidity and low dust, also keep it away from

water, direct sunlight / strong light, corrosive gas, high

magnetic fields, heaters, fires and other heat sources.

6.1 Touch Screen Control

Adjustable

Parameters

Status

Operation

Icon Buttons

Up/Down

Value

Adjust

Buttons