Digikeijs DR5033 Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Extender Digikeijs DR5033. Digikeijs DR5033 18 pages. 3-ampere, h-bridge dcc booster
Also for Digikeijs DR5033: Manual (10 pages), Instruction Manual (18 pages)

Print Page
Digikeijs DR5033 Instruction Manual
DR5033 DIGIBOOST
Central
Connection Possibil-
ities Central
Lenz®
CDE
Sniffer Input
Uhlenbrock®
Intellibox, Intellibox 2,
Intellibox Basis, etc.
LocoNet® „B"
Piko®
LocoNet® „B"
Smartcontrol light®
Uhlenbrock® Daisy®
Please note that it is not possible for us to test all central/booster combinations available on the market.
www.digikeijs.com
® R-Bus, B-Bus are trademarks which are registered in the name of Modelleisenbahn GmbH. XpressNet and RS-Bus is a trademark registered in the name of Lenz
Stand 2021-07-06
Our recommendation!
Our recommendation!
Our recommendation!
Full booster connection.
Railcom® is generated by the central unit and passed on to the booster. The status
of the DR5033, for example, can be queried via LocoNet®. In addition, the booster
can be individually switched off and on again via a magnetic article address.
Important!
As Uhlenbrock® works according to the Common Ground principle, the
track output DR5033 must never be used with the track output of the central unit
on the same circuit. Even a track separation on both sides is not sufficient!
Full booster connection.
Important!
AS Piko®/Uhlenbrock® works according to the Common Ground princi-
ple, the track output DR5033 must never be used with the track output of the cen-
tral unit on the same circuit. Even a track separation on both sides is not sufficient!
special features
P 10