Creon m200 Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Cell Phone Creon m200. Creon m200 13 pages.

Safety instructions

■ Small children
Your device and its accessories are not toys. They may containsmall parts. Keep them out of the reach of small
children.
■ Operating environment
This device meets RF exposure guidelines in the normal use position at the ear or at least 2.2 centimetres (7/8
inch) away from the body. Any carry case, belt clip, or holder for bodyworn operation should not contain metal
and should position the device the above-stated distance from your body. To send data files or messages requires
a quality connection to the network. Data files or messages may be delayed until such a connection is available.
Follow the separation distance instructions until the transmission is completed. Parts of the device are magnetic.
Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media
near the device, because information stored on them may be erased.
■ Medical devices
Operation of radio transmitting equipment, including wireless phones, may interfere with the function of inade-
quately protected medical devices. Consult a physician or the manufacturer of the medical device to determine
whether they are adequately shielded from external RF energy. Switch off your device when regulations posted
instruct you to do so. Hospitals or health care facilities may use equipment sensitive to external RF energy.
■ Implanted medical devices
Manufacturers of medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a
wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to
avoid potential interference with the medical device. Persons who have such devices should:
Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.
Not carry the wireless device in a breast pocket.
Hold the wireless device to the ear opposite the medical device.
Turn the wireless device off if there is any reason to suspect that interference is taking place.
Follow the manufacturer directions for the implanted medical device.
If you have any questions about using your wireless device with an implanted medical device, consult your health
care provider.
■ Hearing aids
Some digital wireless devices may interfere with some hearing aids.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such
as electronic fuel injection, electronic antilock braking, electronic speed control, and air bag systems. For more
information, check with the manufacturer of your vehicle or its equipment. Only qualified personnel should
service the device or install the device in a vehicle. Faulty installation or service may be dangerous and may invali-
date your warranty. Check regularly that all wireless device equipment in your vehicle is mounted and operating
properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the
S A F E T Y I N S T R U C T I O N S
device, its parts, or accessories. Remember that air bags inflate with great force. Do not place your device or ac-
cessories in the air bag deployment area. Switch off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation of the aircraft and may be illegal.
■ Potentially explosive environments
Switch off your device in any area with a potentially explosive atmosphere. Obey all posted instructions. Sparks in
such areas could cause an explosion or fire resulting in bodily injury or death. Switch off the device at refuelling
points such as near gas pumps at service stations. Observe restrictions in fuel depots, storage, and distribution
areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmo-
sphere are often, but not always, clearly marked. They include areas where you would be advised to turn off your
vehicle engine, below deck on boats, chemical transfer or storage facilities and where the air contains chemicals
or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using li-
quefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.
■ Emergency calls
Note: Mobile phones, including your device, work with radio signals, mobile networks and conventional
telephone networks, as well as with functions programmed by the user. Therefore, network reception is not
always guaranteed. Do not rely solely on a mobile phone when communication is vital (e.g. in case of a medical
emergency).
How to make an emergency call:
1. Avoid switching off your device if possible and leave it in the charging station when you are at home, to make
sure the battery is always fully charged. Check the reception quality and make sure a valid SIM card is properly
inserted.
2. Make sure the necessary emergency call numbers have been programmed.
3. In case of an emergency, press the emergency call key until you hear an acoustic signal. If the device is on
"mute", it will vibrate to signal the emergency call has been made correctly. As soon as the call is answered by
an emergency call centre or another programmed number, the device will automatically switch to HandsFree.
If you make an emergency call, please provide all necessary information as detailed as possible. Your mobile
phone may be the only means of communication on site.
For more information, please read these safety instructions or contact your service provider.
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific organisation ICNIRP and include safety
margins designed to assure the protection of all persons, regardless of age and health. The exposure guidelines
for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit
stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the network. That amount changes
S A F E T Y I N S T R U C T I O N S