Creotech KLMKBM-01 Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for Control Unit Creotech KLMKBM-01. Creotech KLMKBM-01 17 pages. Ble mesh

Print Page

1 Product description

The Bluetooth module uses Telink's TLSR8258 Bluetooth chip, which is a Bluetooth

mesh ad hoc network module specially designed based on BLE V5.0 protocol ， it supports

the Sig Mesh V1.0 standard. Customers only need to connect the module to the

application product and turn on the power to link with mobile phone equipment,

digital product equipment and PDA equipment to realize remote control of the mesh

network. It can also facilitate the realization of intra-network broadcast or

arbitrary fixed-point data transmission support. It is very suitable for IoT

information collection, large-scale networking and communication scenarios, smart

home and other applications.

(1) Default broadcast status: It Memorizes networking information, and

automatically access the network after power-on.

(2) Broadcast cycle, adjustable connection interval: The key parameters of the

module can be configured freely, and the efficiency and power consumption can be

independently balanced.

(3) Low-power standby: Using Bluetooth BLE-5.0 technology, 0.1uA in sleep mode.

(4) RF power consumption: TLSR8258: Rx: 6.3mA, TX:0Db 4.8mA/10dbm 23mA, lower

power consumption.

(5) Power-off save: Avoid repeating settings each time power-on.

(6) Scope of application: Smart LED, smart home, smart low-power sensor. Can be

seamlessly connected with Bluetooth laptops, computers plus Bluetooth adapters,

PDAs and other devices

The KLMKBM-01 Bluetooth module has 2 rows of pins, with a pitch of 2mm.

KLMKBM-01 Bluetooth module size: 16 ± 0.35 mm (W) × 24 ± 0.35mm (L) × 2.8 ±

0.15mm(H), and the PCB thickness is 0.8mm±0.1 mm.The package is shown in Figure

3.1