Digilent PmodBB Reference Manual

Browse online or download pdf Reference Manual for Motherboard Digilent PmodBB. Digilent PmodBB 2 pages.

Print Page
PmodBB™ Reference Manual
Revised February 13, 2015
This manual applies to the PmodBB rev. A
Overview
The Digilent PmodBB is handy prototyping platform that can plug directly into a Pmod header on your system
board. It has a 14×19 wire wrap surface as well as a 170 tie point solderless breadboard that can be snugly placed
on top of the perfboard.
The PmodBB.
1
Functional Description
The PmodBB is able to act as an intermediary module between the system board and external circuitry. This is
useful if you need a small area to add a filter to process the incoming signals or a visual indicator showing the
status or strength of the signals.
2
Interfacing with the Pmod
The PmodBB is connected to the system board so that all of pins are pass through. Any specific protocol would be
dependent on the circuitry placed on the module. The two jumper blocks, JP1 and JP2, tie the positive power and
ground lines of both ends of the module together, respectively. Headers J2 and J3 are directly tied to the Pmod
headers J1 and J4, respectively, for easy prototyping access.
DOC#: 502-136
Other product and company names mentioned may be trademarks of their respective owners.
Features include:
Two 2×6 headers to connect the PmodBB
from the system board to another module
Optional jumper blocks to tie the power
pins on both sides of the Pmod together
14×19 perfboard with power and ground
rails
170 tie point solderless breadboard
Copyright Digilent, Inc. All rights reserved.
1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
Page 1 of 2