Digilent CoolRunner-II Reference Manual - Page 3

Browse online or download pdf Reference Manual for Computer Hardware Digilent CoolRunner-II. Digilent CoolRunner-II 5 pages. Starter board

Print Page
CoolRunner-II™ Starter Board Reference Manual
3
Clocks
The CoolRunner-II board includes a fixed-frequency oscillator that
produces an 8MHz clock signal. This primary oscillator output,
labeled PCLK in the schematic, is connected to the GCLK2 pin of the
CPLD (at P38) so that it can be routed to the internal clock divider. An
unloaded socket for a standard half-size DIP oscillator is also
provided at location IC3.
4
User I/O
The CoolRunner-II board provides two pushbuttons and two slide switches for inputs, and four red LEDs and a four-
digit LED display for outputs.
The active-low pushbuttons and slide switches include series resistance for short-circuit protection. The LEDs are
active low, and the seven-segment display uses decoupled-transistor active-high common anode signals and
active-low cathodes.
Three additional LEDs indicate USB power good (LD4), board power good (LD5), and USB link status (LD6).
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Fixed Freq
38
Oscillator
DSC1033
CoolRunner-II
Oscillator
32
Socket
Page 3 of 4