Cres Cor AquaTemp Installation, Operation And Maintenance Manual - Page 6

Browse online or download pdf Installation, Operation And Maintenance Manual for Convection Oven Cres Cor AquaTemp. Cres Cor AquaTemp 15 pages. Humidity convection ovens

Convection
Humidity Oven
Page 6 of 14
Rev. 4 (6/15)
RECIPES:
The control can hold up to 18 saved recipes .
To save a recipe:
1 . Press and hold both the TIME button and the knob
for 5 seconds. The screen will be flashing. This is the
setup menu .
2 . Turn the knob through the menu until you get to
"Edit" .
3 . Press the knob and turn to the recipe you want to edit .
There are 18 blank recipes to customize and save .
4 . Press the knob and enter the cook, hold and time
values .
5 . After the entering the final value, "Edit" will show
again .
6 . Press the knob to edit more recipes or turn to "End" to
exit the menu .
To use one of the recipes:
1 . Push one of the three RECIPE group buttons for the
recipe number you want .
2 . Turn the knob to the recipe you want and press the
knob to select .
3 . Press the START button to preheat .
4 . After it shows "READY", press the START button
again to begin the recipe .
Note: The display button will cycle through all the values
as before, but will include the recipe number, if
using a saved recipe .
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
FL-2373
OPERATING INSTRUCTIONS, continued
5925 Heisley Road • Mentor, OH 44060-1833
Quick Recipe Note:
You can set "Quick Recipes" for recipes that you use
often . This way, when you press a recipe group button and
press start, that recipe will start cooking without searching
for the recipe number . Recipe numbers can be set up as
"quick recipes" as follows:
1 . Press and hold both the TIME button and the knob for
5 seconds to get into the menu .
2 . Turn the knob to "RBTN" and press the knob . The
word "PUSH" will flash.
3 . Press one of the recipe group buttons to assign a
recipe .
Note: Recipe numbers 1-6 can be set up as Group button 1 .
Recipe numbers 7-12 can be set up as Group button 2 .
Recipe numbers 13-18 can be set up as Group button 3 .
4 . Turn the knob to the recipe number you want to assign
to that button and press the knob .
Repeat the process to assign recipes to the other two recipe
group buttons; or,
turn the knob to "END" the submenu; turn to "END" the
menu .
Additional Menu Settings:
Press and hold both the TIME button and the knob for 5
seconds to get into the menu .
Here you can set the recipes, quick recipes, temperature
units (°C or °F) and the datalog
settings (USB connection required):
"RECE" allows you to enable or disable the data record
feature .
"RECF" allows you set how often (in minutes) a
datapoint will be recorded .
"RECD" allows you to set how long (in days) you
would like the data to be stored in memory .