FIAM. VENUS 206 Product Information - Page 6

Browse online or download pdf Product Information for Indoor Furnishing FIAM. VENUS 206. FIAM. VENUS 206 17 pages.

Print Page

VENUS Mirror

Art. 200 - 204 - 206 - 208 - 210

Read this information carefully before using the product and keep it for

future reference. Failure to comply carefully with the instructions which

follow may put the safety of the product and its users at risk.

Product description and intended use

• Product description and composition

The VENUS Mirror - Art. Code 200 - 204 - 206 - 208 - 210 is a Mirror intended as an item of indoor furniture. It is manufactured

from curved float plate glass. The VENUS Mirror was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia

(PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it

• Intended use

The article known as VENUS is designed and built to serve as a Mirror for indoor use and must therefore be used only for this

purpose and no other.

For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions

provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the

telephone numbers stated in this document.

• Transporting and storing the VENUS Mirror in the original packaging

The VENUS Mirror, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking. It must

be stored indoors in a dry place.

Place the VENUS Mirror in the original packaging, in the horizontal position. The arrows on the label on the packaging must be

vertical and pointing upward.

Never place weights or loads in excess of 100 Kg on the original packaging, since exceeding this weight may cause the breakage

of the article.

The VENUS Mirror in the original packaging weighs about 60 kg (art. 206), about 70 kg (art. 208), about 75 kg (art. 204), about

87 kg (art. 210) or about 104 kg (art. 200). It must therefore be placed on surfaces capable of supporting its weight.

• Removing the packaging - assembly

To remove the original packaging of the VENUS Mirror, proceed as follows.

a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.

b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may

damage the VENUS Mirror.

c) Remove the VENUS Mirror from its packaging. At least two people are required for this operation. Wear gloves which assure

a good grip on the float glass.

d) Fix the Mirror to the wall following the instructions provided.