Cres Cor CO151XWUA5DE2401 Installation, Operation And Maintenance Manual - Page 6

Browse online or download pdf Installation, Operation And Maintenance Manual for Convection Oven Cres Cor CO151XWUA5DE2401. Cres Cor CO151XWUA5DE2401 15 pages. Humidity convection ovens

Print Page

Convection

Humidity Oven

Page 6 of 14

Rev. 4 (6/15)

RECIPES:

The control can hold up to 18 saved recipes .

To save a recipe:

1 . Press and hold both the TIME button and the knob

for 5 seconds. The screen will be flashing. This is the

setup menu .

2 . Turn the knob through the menu until you get to

"Edit" .

3 . Press the knob and turn to the recipe you want to edit .

There are 18 blank recipes to customize and save .

4 . Press the knob and enter the cook, hold and time

values .

5 . After the entering the final value, "Edit" will show

again .

6 . Press the knob to edit more recipes or turn to "End" to

exit the menu .

To use one of the recipes:

1 . Push one of the three RECIPE group buttons for the

recipe number you want .

2 . Turn the knob to the recipe you want and press the

knob to select .

3 . Press the START button to preheat .

4 . After it shows "READY", press the START button

again to begin the recipe .

Note: The display button will cycle through all the values

as before, but will include the recipe number, if

using a saved recipe .

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com

FL-2373

OPERATING INSTRUCTIONS, continued

5925 Heisley Road • Mentor, OH 44060-1833

Quick Recipe Note:

You can set "Quick Recipes" for recipes that you use

often . This way, when you press a recipe group button and

press start, that recipe will start cooking without searching

for the recipe number . Recipe numbers can be set up as

"quick recipes" as follows:

1 . Press and hold both the TIME button and the knob for

5 seconds to get into the menu .

2 . Turn the knob to "RBTN" and press the knob . The

word "PUSH" will flash.

3 . Press one of the recipe group buttons to assign a

recipe .

Note: Recipe numbers 1-6 can be set up as Group button 1 .

Recipe numbers 7-12 can be set up as Group button 2 .

Recipe numbers 13-18 can be set up as Group button 3 .

4 . Turn the knob to the recipe number you want to assign

to that button and press the knob .

Repeat the process to assign recipes to the other two recipe

group buttons; or,

turn the knob to "END" the submenu; turn to "END" the

menu .

Additional Menu Settings:

Press and hold both the TIME button and the knob for 5

seconds to get into the menu .

Here you can set the recipes, quick recipes, temperature

units (°C or °F) and the datalog

settings (USB connection required):

"RECE" allows you to enable or disable the data record

feature .

"RECF" allows you set how often (in minutes) a

datapoint will be recorded .

"RECD" allows you to set how long (in days) you

would like the data to be stored in memory .