FIAMA F20 User Manual And Maintenance - Page 5

Browse online or download pdf User Manual And Maintenance for Monitor FIAMA F20. FIAMA F20 7 pages. Display with internal battery power supply and hollow shaft rotative transducer
Also for FIAMA F20: User Manual And Maintenance (8 pages)

Print Page

Display for rotative transducer

Origin displacement

This parameter is added or subtracted from the current quota to correct the value showed on the display, for

example following wear or changing of tool. Setting a positive value on display appears the current quota added

to this value.

Set zero to exclude the offset function (manufacturer's value).

The offset is not available if the function of tool-change is selected.

Adjusting of quota

After the assembling of instrument on the machine and setting of all parameters, to visualize on the display the

correct measure it is necessary to carry out the reset or preset of quota. Position the shaft in a point in which is

known exactly the correct measure that has to be visualized (ex. stroke checking) or measure the value in that

point of axis. Programme parameter

programming. Now press

display the correct measure to visualize, confirm with

If the adjusting quota is worth to zero instead of the preset is possible use reset, setting value 1 on the first digit

on the right of

Now that the instrument is adjusted its necessary re-establish to the wanted value parameter

avoid

Battery change

The instrument is supplied with batteries type AA of 1,5V (alkaline type) which assures a functioning of about 2

years. When the loading level goes under a certain value, the indicator of flat-battery begins to blink in

occasional way and when it keeps switched on its necessary to change the batteries within a month.

To enter into the battery-holder its necessary to take off the front-cover prising on the two hollows placed on a

side of the instrument. Take off the cover and take out the battery-holder and change the batteries paying

attention to the polarity indicated. Without batteries the instrument switches off: in this phase do not rotate the

hollow shaft to avoid loosing of correct quota. As soon as the batteries are fitted inside, the instrument

switches on with the same value on the display as at the moment of the switching off and if the shaft has not be

moved the value will be correct. In case the shaft is moved during the switching off, to re-establish the correct

measure its necessary to repeat the adjustment proceeding.

Meaning of the symbols on the display

Indicator of flat battery: begins to blink when the level of loading goes under a certain value and when it

keeps switched on its necessary to change the batteries within 1 month.

Indicator of values changing: it blinks during the programming phase.

Indicators for the 5 origins.

ABS Indicator of absolute quota.

REL ndicator of relative quota.

indicator of mm.

Inch indicator of inchesi.

Deg Indicator of degrees.

Indicator of positive Offset: indicates that the measure is corrected by a positive offset.

Indicator of negative Offset: indicates that the measure is corrected by a negative offset.

Indicator of changing origins activated.

Data:13/01/16

and it will appear Preset, press again 2 times

RESET

, this way pressing

RESET

file: F20K+EN20M_ing.doc

with value 3 in the first digit on the right and go out of the

and on the display appears the correct measure.

RESET

the value on the display will be zeroed.

F20K-EN20M

and set on the

RESET

DISPLAY FOR

RELATIVE QUOTE

DISPLAY FOR

ABSOLUTE QUOTE

pg 5/7