Digilock DL330BT User Instructions - Page 2

Browse online or download pdf User Instructions for Locks Digilock DL330BT. Digilock DL330BT 3 pages. Bluetooth lock

Print Page

Pair your device:

1) Install 4 x AA batteries and plug in the connector.

2) Push the reset button for 3-5 seconds, you will hear 'Di Di' to confirm the lock is in

discovery mode.

Reset button is located under the battery housing (circled in red)

3) Immediately open your app, tap the menu icon in the top-left corner, then 'add devices',

'lock' and select your lock from the list. Your lock will only be selectable when it's in

discovery mode.

4) When you find your lock in the TTlock app, it means the pairing is successful, if not, try

the above steps again.

Changing the Admin code:

1) Open the TTlock app.

2) Select the lock you wish to change the admin code for.

3) Tap the 'gear' symbol in the top-right hand corner of the screen.

4) Tap 'Admin passcode' and follow the prompts.

Sending e-Keys:

1) Open the TTlock app.

2) Select the lock you wish to authorise an eKey for.

3) Tap 'eKey'. Choose period key or permanent key.

4) Input the person's mobile number, leave a message, then tap 'send'.