Digilock Numeris Versa Mini Product Manual - Page 5

Browse online or download pdf Product Manual for Keypad Digilock Numeris Versa Mini. Digilock Numeris Versa Mini 11 pages. Touch rfid
Also for Digilock Numeris Versa Mini: Manual (18 pages), Product Manual (11 pages)

Print Page
Digilock Numeris Versa Mini Product Manual

Programming Instructions - in Assigned Use Functionality

Assign User Credentials (for assigned use functionality only)

Make sure that the lock is set for assigned use functionality (a green LED will fl ash when = is pressed). Up to 20 user credentials (User Codes and/or User
Keys) may be assigned to each lock.
1a

Assign User Codes:

Press
=` 55 `
.
The LED will fl ash.
While the LED is fl ashing, insert a valid Manager Key.
A two-tone beep will be heard and the LED will turn on.
1a

Assign User Keys:

Press
=` 55 `
.
The LED will fl ash.
While the LED is fl ashing, insert a valid Manager Key.
A two-tone beep will be heard and the LED will turn on.
Express Register User Credentials and Manager Keys (for assigned use functionality only)
Make sure the lock is set for assigned use functionality (a green LED will fl ash when = is pressed). The Programming Key can quickly
program multiple locks to operate with the same user credentials and Manager Keys.
1
Go to a lock already programmed
to operate with the user credentials
and Manager Keys.
Press
= ` 66 `
.
The LED will fl ash.
*The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.
Product Guide
1b
1b
2
While the LED is fl ashing, insert the
Programming Key.
A two-tone beep will be heard and
the LED will turn off.
Keypad
Shared & Assigned Use Functionality
2a
= [new 4-7 digit code] `
While the LED is on, press
A two-tone beep will be heard.
= [the same 4-7 digit code] `
Press
Two sets of two-tone beeps will be heard and the LED will turn off.
2
While the LED is on, insert a User Key.
Two sets of two-tone beeps will be heard and the LED will turn off.
3
Insert the Programming Key to
program each lock to operate
with the same user credentials and
Manager Keys.
Two sets of two-tone beeps will be
heard and the LED will fl ash twice to
indicate successful programming.
2b
.
.
4a
4b
End Express Registration mode:*
Go to any programmed lock.
Press
= `
then insert the
Programming Key.
5