Crescendo Fitness 280 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Elliptical Trainer Crescendo Fitness 280. Crescendo Fitness 280 16 pages. Magnet power elliptical bike

Print Page

6. Assembly Instructions

Attention:

Please follow these assembly instructions step by step to

assemble this elliptical.

1. Install the Rear Stabilizer

Attach the Rear stabilizer (2) to the Main frame (1) with two

Bolts (38), spring washers (51), and Flat washers (50).

(Refer figure 1)

2. Install the Front Stabilizer

Attach the Front stabilizer (13) to the Main Frame (1) with two

Bolts (38), spring washers (51), and Flat washers (50). (Refer

figure 2)

3. Install the Front Upright Frame

1. Put the end of resistance cable into the spring

hook of Tension control wire (12) as shown on

drawing A of figure 3

2. Pull the resistance cable up and force it into the

gap of metal bracket of Tension control wire (12)

as shown on drawing B of figure3

3. Connect the resistance cable with the Tension

control wire (12) completed as shown on

drawing C of figure 3

4. Connect the computer wire (26) to the Sensor wire (25) coming out from mainframe

(1).

5. Insert the Front upright frame (14) to the main frame (1) and secure it with six pcs of

Bolts (38), Spring washers (51), and Arc washers (45) as shown on drawing D of

figure 3.