Crescent DIVA Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Stroller Crescent DIVA. Crescent DIVA 15 pages.

diva
Instruction manual
English

Safety information

Read instruction manual carefully before using the babystroller and save this for future reference.
Your childs safety may be in jeopardy if these instructions are not followed.
• WARNING It may be dangerous to leave your child unattended.
• WARNING Ensure that all the locking devices are engaged before use
• WARNING Any load attached to the handle affects the stability of the pram/pushchair.
• WARNING Always use the croth strap in combination with the waist belt.
• WARNING This seat is not suitable for children under 6 months.
• WARNING Do not add a mattress thicker than 30mm.
• WARNING Use a harness as soon as your child can sit unaided.
• WARNING Check that the pram body or seat unit attachement devices are correctly engaged
before use.
• The babystroller can be loaded with maximum 30lbs, of which 4lbs in the basket.
• Only adults may assemble and operate the babystroller.
• Always check that a "click" is heard everytime an adjustment is made.
• Always unload the child from the babystroller whenever an obstacle is to be passed.
• The babystroller may not be used together with a carrycot, other than the original one.
• Never leave children alone with the babystroller unattended.
• Never let children play in or around the babystroller.
• Always lock the parkingbrake when you leave the babystroller or loading/unloading the child.
• Do not load the handle with shoppingbags or similar.
• Only approved accesories may be used together with the babystroller.
• This vehicle shall be used for one child.
• This product is not suitable for running or skating.
Assembly instructions
EN 1888:2003
Unfolding the babystroller
• Press the button "Release to unfold" on chassie side.
• Grip the handlebar and pull upwards until the chassi is completly
unfolded.
• A "click" is heard when the babystroller is correctly unfolded.
Assembly of wheels
• Front wheels are aiming at the hole of the front wheels base,
push to the "Unlock" position maximum (1).
• Push the button to complete the installation (2) towards "Lock".
• Push the rear wheel axl into the axlhole until locked.
• Pull the wheel to make sure it is securely locked in position.
Assembling the seat
• Pull the seats position selecting bar upward from the both sides.
• Adjust the bar to 45 degrees angle.
• Assemble the seat to the chassi as shown on this picture.
• Seat is securly attached when a "click" is heard.