Digimerge DBD14 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Security Camera Digimerge DBD14. Digimerge DBD14 6 pages. High resolution indoor dome camera

Print Page

INSTALLATION. INDOOR DOME

FIG 1

Open

FIG 2

Ceiling

Dome base

Cut Away for

Cable side exit

Camera Body

Open

1) Remove camera base by twisting it

clockwise to lign up the arrows on

the side of the camera housing (see

FIG 1). Remove the camera base by

pulling it away from the camera.

Note: Dome cover is attached to a cord

to stop falling off.

2) Remove the dome cover by

inserting a flat screw driver into the

slot next to the dome cover release

clip (See FIG 2) and pressing down

on the screwdriver

Note: If your installation requires

cable to be from side of dome,

remove the cut away portion of

the base.

3) Attach base to surface using drill

template as a guide.

With base attached, re-fit the body of

the camera onto the base using the

arrows as a guide (see FIG 1) and

turning the camera clockwise.

4) Adjust camera viewing angle and

secure into place by tightening

thumb screws.

Re-attach the camera cover, using the

dome cover release clip as a guide,

until it snaps into place.

Note: Lens adjustment levers are by

default in the locked position.

Turn counter clockwise to

unlock. Tighten levers to

secure lens setting.

-5-