Cresco 20 Manual - Page 6

Browse online or download pdf Manual for Spreader Cresco 20. Cresco 20 18 pages. Fertilizer and salt spreader

Print Page

Assembling your Cresco 20

Feed the axle (14) through the hole without the axle

bearing (Item 5), push it through the hole in the

centre of the gearbox and through the hole (Item 5)

on the other side.

NOTE

Note: The axle and gearbox are now in position. There

are two holes on the axle. One hole is closer to the

middle of the axle and the other hole is closer to the

edge of the axle. When assembling the wheels: one

wheel will be pinned on the inside of the wheel and

the other will be pinned on the outside of the wheel.

Take the long cotter pin and place it through the

hole on the axle on the inside of the wheel.

Push the other axle bearing (Item 5) into

position.

Take one of the pneumatic wheels. Push the

wheel through the axle. Make sure the valve is

located on the outside.

Attach the other pneumatic wheel. Take the

small cotter pin (item 7) and the wheel washer

(6). Place the wheel washer over the axle and

slide the cotter pin (item 7) into the holes to fix

the second wheel.