Diginet LEDsmart+ MMDM RT Manual - Page 3

Browse online or download pdf Manual for Dimmer Diginet LEDsmart+ MMDM RT. Diginet LEDsmart+ MMDM RT 12 pages. Setup functions

Print Page

A1: Dimmer has been powered up via mains 240Vac for LESS THAN 15 MINUTES

Step 1

Press and hold the dimmer rotary shaft for 10 seconds

Note: Connected lights will dim up or down, this is normal

Step 2

The white LED Indicators will blink ON/OFF twice per second. This indicates that

the dimmer is now in Setup Mode

Note: If more than one LEDsmart

devices will now enter setup mode. The blink ON/OFF will also be see on all other

LEDsmart

Step 3

The dimmer is ready for the settings to be adjusted as required. Go to the

relevant setup function instructions

A2: Dimmer has been powered up via mains 240Vac for MORE THAN 15 MINUTES

Step 1

Press and hold the dimmer rotary shaft for 30 seconds

Note: This resets the Setup Entry time back to 10 seconds (for the next 30 minutes)

Note: Connected lights will dim up or down, this is normal

Step 2

The white LED Indicators will blink ON/OFF twice per second. This indicates that the

dimmer is now in Setup Mode

Note: If more than one LEDsmart

these devices will now enter setup mode. The blink ON/OFF will also be see on all

other LEDsmart

Step 3

The dimmer is ready for the settings to be adjusted as required. Go to the relevant

setup function instructions

device is connected in parallel, all these

devices connected in parallel

device is connected in parallel (see pages 5-7), all

devices connected in parallel

Setup Functions - Rotary Dimmer/Switch