ABB Sensi+ Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Measuring Instruments ABB Sensi+. ABB Sensi+ 4 pages.

Print Page

Proper planning and preparation will result in detailed documents providing information for:

• Physical location and mounting of the instrument

• Cabling and communication

• Gas sampling and gas connection

• Instrument configuration

All documents produced during preparation and planning should be available to qualified and

authorized personnel in charge of installing and commissioning the instrument, and to the authority

having jurisdiction (AHJ).

Handling the Instrument

The instrument weighs 50 kg (110 lb). It is not designed to be handled by one person. At least two

people should be handling the instrument.

To avoid personal injuries, make sure to follow the proper lifting and carrying instructions when

handling the instrument.

General Lifting and Carrying Precautions

The use of proper methods for lifting and handling objects protects against injury and makes work

easier. Over time, safe lifting technique should become a habit.

The following are essential steps to safe lifting and handling:

• Eyeball the load and check overall conditions. Do not attempt to lift by yourself loads that appear to

be too heavy or unwieldy.

• Make sure that there is enough room for movement, and that the footing is secure.

• Be careful with your balance. Feet should be shoulder width apart, with one foot behind the object

that is to be lifted and the other just beside it.

• Bend your knees (do not stoop). Keep your back straight (not necessarily vertical) and tuck your chin

(it helps straightening your back).

• Grip the load with the palm of your hands and your fingers.

• Push UP with your legs.

• Keep arms and elbows close to your body while lifting.

• Carry the load close to your body. Do not twist your body while carrying the load. To change

direction, shift your foot position and turn your whole body.

• To lower the object, again, bend your knees (do not stoop). To deposit the load on a bench or shelf,

place it on the edge and push it into position. Make sure that your hands and feet are clear when

placing the load.

Sensi+ Quick Start Guide