Cisco 2950 - Catalyst Switch Getting Started Manual - Page 10

Browse online or download pdf Getting Started Manual for Switch Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 29 pages. Long-reach ethernet switches
Also for Cisco 2950 - Catalyst Switch: Solution Manual (17 pages), Product Bulletin (3 pages), Product Support Bulletin (5 pages), Migration Manual (25 pages), Product Support Bulletin (6 pages), Datasheet (20 pages), Manual (19 pages)

Cisco 2950 - Catalyst Switch Getting Started Manual

Installation Warning Statements

This section includes the basic installation warning statements.
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. Statement 148
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take
special precautions to ensure that the system remains stable. The following guidelines
are provided to ensure your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with
the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or
servicing the unit in the rack.
Warning
To prevent the switch from overheating, do not operate it in an area that exceeds the
maximum recommended ambient temperature of 113°F (45°C). To prevent airflow
restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings.
Statement 17B
Warning
This equipment is intended to be grounded. Ensure that the host is connected to earth
ground during normal use. Statement 39
10
Statement 1006