Cisco 2950SX 48 SI - Catalyst Switch Datasheet - Page 12

Browse online or download pdf Datasheet for Switch Cisco 2950SX 48 SI - Catalyst Switch. Cisco 2950SX 48 SI - Catalyst Switch 15 pages. Catalyst 2950 series switches

Print Page

Feature

Description/Part Numbers

Standards

• IEEE 802.1x support

• IEEE 802.3x full duplex on 10BASE-T and 100BASE-TX ports

• IEEE 802.1D Spanning-Tree Protocol

• IEEE 802.1p class-of-service (CoS) prioritization

• IEEE 802.1Q VLAN

• IEEE 802.3 10BASE-T speciﬁcation

• IEEE 802.3u 100BASE-TX speciﬁcation

• IEEE 802.3ad

• IEEE 802.3z 1000BASE-X speciﬁcation

Connectors

• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP)

and cabling

cabling

• 100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling

• 1000BASE-SX ports: MT-RJ connectors, up to 1800 feet (550 meters) cable distance for 50/125

or up to 900 ft (275 m) cable distance for 62.5/125 micron multimode ﬁber-optic cabling

• Management console port: 8-pin RJ-45 connector, RJ-45-to-DB9 adapter cable for PC

connections; for terminal connections, use RJ-45-to-DB25 female data-terminal-equipment

(DTE) adapter (can be ordered separately, Cisco part number ACS-DSBUASYN=)

Type of cable, Cisco part number:

MT-RJ patch

cables for

• 1-meter MT-RJ-to-SC multimode cable, CAB-MTRJ-SC-MM-1M

Cisco Catalyst

• 3-meter MT-RJ-to-SC multimode cable, CAB-MTRJ-SC-MM-3M

2950SX-24

• 5-meter MT-RJ-to-SC multimode cable, CAB-MTRJ-SC-MM-5M

Switch

• 1-meter MT-RJ-to-ST multimode cable, CAB-MTRJ-ST-MM-1M

• 3-meter MT-RJ-to-ST multimode cable, CAB-MTRJ-ST-MM-3M

• 5-meter MT-RJ-to-ST multimode cable, CAB-MTRJ-ST-MM-5M

Power

Customers can provide power to a switch by using the internal power supply, the Cisco RPS 675

connectors

Redundant Power System. The connectors are located at the back of the switch.

Internal power supply connector:

• The internal power supply is an auto-ranging unit.

• The internal power supply supports input voltages between 100 and 240 VAC.

• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

Cisco RPS 675 connector:

• The connector offers connection for an optional Cisco RPS 675 that uses AC input and supplies

DC output to the switch.

• The connector offers a 675W redundant power system that supports six external network

devices and provides power to one failed device at a time.

• The connector automatically senses when the internal power supply of a connected device

fails and provides power to the failed device, preventing loss of network trafﬁc.

• Attach only the Cisco RPS 675 (Model PWR675-AC-RPS-NI=) to the redundant power supply

receptacle with this connector.

Indicators

• Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications

• System status LEDs: system, RPS, and bandwidth-utilization indications

Dimensions

• 1.72 x 17.5 x 9.52 in. (4.36 x 44.45 x 24.18 cm) (Cisco Catalyst 2950SX-24, 2950-24, 2950-12)

and weight

• 1.72 x 17.5 x 13 in. (4.36 x 44.45 x 33.02 cm) (Cisco Catalyst 2950SX-48, 2950T-48)

(H x W x D)

• 1 RU high (1.72 in./4.36 cm)

• 6.5 lb (3.0 kg) (Cisco Catalyst 2950SX-24, 2950-24, 2950-12)

• 10.b lb (4.8 kg) (Cisco Catalyst 2950SX-48, 2950T-48)

Cisco Systems, Inc.

Page 12 of 15