Cisco 3550-24 - Catalyst SMI Switch Datasheet - Page 15
Browse online or download pdf Datasheet for Switch Cisco 3550-24 - Catalyst SMI Switch. Cisco 3550-24 - Catalyst SMI Switch 21 pages. Cisco catalyst 3550-48: supplementary guide
Also for Cisco 3550-24 - Catalyst SMI Switch: Product Bulletin (3 pages), Product Bulletin (5 pages), Questions And Answers (9 pages)
Print Page
Feature
Year 2000 (Y2K) compliance
Connectors and cabling
Power connectors
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Description
• 1000Base-CWDM GBIC 1610nm
• RMON I and II standards
• SNMPv1, SNMPv2c, AND SNMPv3
• Y2K compliant
• 10BaseT ports: RJ-45 connectors; two-pair Category 3, 4, or 5 unshielded
twisted-pair (UTP) cabling
• 100BaseTX ports: RJ-45 connectors; two-pair Category 5 UTP cabling
• 100BaseFX ports: MT-RJ connectors, 50/125 or 62.5/125 micron multimode
fiber-optic cabling
Type of Cable
• 1-meter, MT-RJ-to-SC multimode cable
• 3-meter, MT-RJ-to-SC multimode cable
• 5-meter, MT-RJ-to-SC multimode cable
• 1-meter, MT-RJ-to-ST multimode cable
• 3-meter, MT-RJ-to-ST multimode cable
• 5-meter, MT-RJ-to-ST multimode cable
• 1000BaseT ports: RJ-45; two-pair Category 5 UTP cabling
• 1000BaseT GBIC-based ports: RJ-45 connectors; two-pair Category
5 UTP cabling
• 1000BaseSX, -LX/LH, -ZX, and CWDM GBIC-based ports: SC fiber
connectors, single-mode or multimode fiber
• Cisco GigaStack GBIC ports: copper-based Cisco GigaStack cabling
• Management console port: 8-pin RJ-45 connector, RJ-45-to-RJ-45 rollover
cable with RJ-45-to-DB9 adapter for PC connections; for terminal
connections, use RJ-45-to-DB25 female data-terminal-equipment (DTE)
adapter (can be ordered separately from Cisco, part number
ACS-DSBUASYN=)
Customers can provide power to a switch by using either the internal power
supply or the Cisco RPS 300 Redundant Power System. The connectors are
located at the back of the switch.
Internal Power Supply Connector
• The internal power supply is an auto-ranging unit.
• The internal power supply supports input voltages between 100 and
240 VAC.
• Use the supplied AC power cord to connect the AC power connector to an
AC power outlet.
Cisco RPS Connector
Cisco Systems, Inc.
Page 15 of 20
Cisco Part Number
CAB-MTRJ-SC-MM-1M
CAB-MTRJ-SC-MM-3M
CAB-MTRJ-SC-MM-5M
CAB-MTRJ-ST-MM-1M
CAB-MTRJ-ST-MM-3M
CAB-MTRJ-ST-MM-5M