Cisco 550XG series Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Switch Cisco 550XG series. Cisco 550XG series 17 pages. 10g stackable managed switches

Print Page

To install the switch into a 19-inch standard chassis:

Place one of the supplied brackets on the side of the switch so the

TEP

four holes of the brackets align to the screw holes, and then use the

four supplied M4 screws to secure it.

Repeat the previous step to attach the other bracket to the opposite

TEP

side of the switch.

After the brackets are securely attached, the switch is now ready to

TEP

be installed into a standard 19-inch rack as shown here.

Connecting Network Devices

To connect the switch to the network:

Connect an Ethernet cable to the Ethernet port of a computer,

TEP

printer, network storage, or other network devices.

Connect the other end of the Ethernet cable to one of the

TEP

numbered Ethernet ports of the switch. The LED of the port lights if

the device connected is active.

The Ethernet port light turns green when the connection is active.

Refer to

different ports and LEDs on each switch.

Repeat

TEP

connect to the switch.

Cisco 550XG Switches Features

Step 1

and

Step 2

Cisco 550XG Series 10G Stackable Switches Quick Start Guide

for each device that you want to

for details about the