Cisco 6260 Manual - Page 3

Browse online or download pdf Manual for Switch Cisco 6260. Cisco 6260 24 pages. Quad-port flexi atu-c to octal-port dmt atu-c line card conversion procedures
Also for Cisco 6260: Quick Reference Manual (38 pages)

Print Page
Cisco 6260 Manual
•
•
General Safety Precautions
Before working on the equipment, be aware of standard safety practices and the hazards involved in
working with electrical circuitry to prevent accidents. Adhere to the following cautions and warnings for
safe and hazard-free installation.
Caution
Proper ESD protection is required whenever you handle Cisco equipment. Installation and
maintenance personnel should be properly grounded using grounding straps to eliminate the risk of
ESD damage to the equipment. Modules are subject to ESD damage whenever they are removed from
the chassis.
Caution
If fuses are already installed in the fuse and alarm panel, remove them. You can replace the fuses
after the system I/O module is installed. Do not power up the system while you install and connect
the system I/O module.
Static voltages as low as 30 volts can cause latent damage to circuitry on the system I/O module.
Caution
Observe all standard antistatic procedures (for example, wear a grounding strap).
This warning symbol means danger . You are in a situation that could cause bodily injury. Before
Warning
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. To see translations of the warnings
that appear in this publication, refer to the Regulatory Compliance and Safety Information
document that accompanied this device.
Waarschuwing
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel
kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van
de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard
maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in
deze publicatie verschijnen, kunt u het document Regulatory Compliance and Safety Information
(Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit
toestel is ingesloten.
Varoitus
Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan.
Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä
vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä julkaisussa esiintyvien
varoitusten käännökset löydät laitteen mukana olevasta Regulatory Compliance and Safety
Information -kirjasesta (määräysten noudattaminen ja tietoa turvallisuudesta).
OL-0991-01
General Maintenance Guidelines, page 6
Preventing Electrostatic Discharge Damage, page 7
Cisco 6260 Quad-Port Flexi ATU-C to Octal-Port DMT ATU-C Line Card Conversion Procedures
General Safety Precautions and Maintenance Guidelines
3