Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Installation Note - Page 13

Browse online or download pdf Installation Note for Switch Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 46 pages. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Also for Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Installation Note (14 pages), Solution Manual (17 pages), White Paper (19 pages), Description (1 pages), Product Bulletin (6 pages), Notice (4 pages), Datasheet (9 pages), Datasheet (18 pages), White Paper (18 pages), Configuration Manual (8 pages), Installation Note (28 pages), Troubleshooting Manual (11 pages), Installation Note (18 pages), User Manual (17 pages), Installation Note (24 pages), Manual (19 pages), Installation Note (36 pages)

Print Page
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Installation Note
Figure 3
Partially reinstall the cap nut, rotating about 3 turns so that there is a space of about 1/8 inch (3 mm)
Step 6
between the bottom of the cap nut and the top of the DFC3 daughter card, as shown in
nut acts as a stop when you unseat the daughter card connector so that the DFC3 daughter card does not
move horizontally and cause damage to the base board.
78-15893-08
Removing the DFC Daughter Card Installation Hardware
WS-X5530
Catalyst 6500 Series Distributed Forwarding Card 3 for WS-X67xx Modules Installation Note
Removing a CFC or DFC Daughter Card
Installation
bracket. May
or may not
be present.
Figure
4. The cap
13