BYK 4560 Quick Start Manual
Browse online or download pdf Quick Start Manual for Measuring Instruments BYK 4560. BYK 4560 2 pages.
Print PageMeasure what you see.
Operation
operate
Main menu
Mode
Geometry/Sensor
Memory/Organizer
Difference
Calibration
Setup
Please
note: The software smart-chart for data analysis
and the detailed operating manual are available for
download from the support section at:
www.byk.com/instruments
BYK-Gardner GmbH · Lausitzer Strasse 8 · 82538 Geretsried · Germany · Tel. +49-8171-3493-0 · Fax +49-8171-3493-140 · www.byk.com/instruments
A member of
mode wheel:
•
Switch on
•
Show menu
•
Select function
•
Activate function
operate-button:
•
Measure
Navigation Symbols:
¢
¢
Back to previous menu
}
} Got to sub-menu
}
3 Function activated
}
* Guide to language menu
}
}
*}
How to calibrate?
Gloss
press
press
Autodiagnosis
scroll
press
Please clean standard
Confirm ¢
Cancel ¢
Note: Do not clean the standard with acetone!
For cleaning information see operating manual.
Thickness (only micro-TRI-gloss μ)
Main menu
Calibration
Calibrate
Thickness Fe
Thickness NFe
*It is advisable, to perform the zero calibration on the uncoated
metal of the sample to be tested.
•
Turn on the unit in holder
•
Autodiagnosis checks standard
and calibration
•
If requested, clean the standard
and start calibration by pressing
[mode]
the mode wheel
[operate]
•
Select the desired sensor
(Fe or NFe)
}
•
Put the unit on the zero
standard or original substrate*
}
•
Press operate button
}
•
Hold the unit free in air and
press operate
}
Additives & Instruments