Crest Audio CPL 10+ Operating Manual - Page 4

Browse online or download pdf Operating Manual for Speaker System Crest Audio CPL 10+. Crest Audio CPL 10+ 16 pages. Passive 2-way loudspeaker system

Print Page
EN

SPECIFICATIONS

Con guration: Compact 2-way passive speaker
Power Handling*: 300 Watts Continuous, 600 Watts Program, 1,200 Watts Peak
*To reach the rated power, there must be an infrasonic lter set to 50 Hz, 12 dB / Octave Butterworth minimum ltering. If the CPL 10 + is used with a crossover for a
Subwoofer, then the high pass section needs to meet this criteria at a minimum. A higher frequency and/or lter slope is acceptable.
Nominal Impedance: 8 Ohms
Sensitivity (1W/1m): 96 dB
Maximum SPL (1m): 120 dB @ 300 Watts; 126 dB @ 1200 Watts Peak
Frequency Response*: 88 Hz - 20 kHz, ±3 dB
*1m on-axis, swept-sine in anechoic environment
Frequency Range*: 51 Hz - 20 kHz, -10 dB
*1m on-axis, swept-sine in anechoic environment
Box Tuning Frequency: 65 Hz
Nominal Coverage Pattern (-6 dB): 90° H x 60° V
LF Driver: 1 x 10" (250 mm) Woofer - Crest Audio CPL10E2
LF Driver Voice Coil: 2.5" (65 mm)
HF Driver: 1 x 1" (25.4 mm) Compression Driver - Crest Audio HF36FP1
HF Driver Voice Coil: 1.4" (36 mm)
Input Connections: 2 x 4-pin twist-lock (NL-4 Style) & 1 x 4-pin Euroblock
Input, Pin 1+ = (+) positive; Pin 1- = (-) negative / Loop
rough, Pin 2+ = (+) positive; Pin 2- = (-) negative
Enclosure Material: 0.6" (15 mm) Plywood
Finish: Textured polyurea paint, available in Black & White
Black Finish: RAL: 9004 Signal Black (Pantone: Black 6)
White Finish: RAL: 9003 Signal White (Pantone: 705)
Front: Full-coverage perforated steel grille, backed with acoustically neutral foam
Mounting Provisions: Twelve (12) M8 suspension points (3 top, 3 bottom, 2 le , 2 right, and 2 rear) and
additional set of four (4) M6 mounting points rear for optional Peavey Versamount 35
Overall Dimensions (HWD):
Front - 20.87" x 12.56" x 13.39" (530 x 319 x 340 mm)
Rear - 20.87" x 8.5" x 13.39" (530 x 215.9 x 340 mm)
Net Weight: 33 lbs (15 kg)
2