Cisco 9124 - mds multilayer fabric switch Configuration Manual - Page 41

Browse online or download pdf Configuration Manual for Switch Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 pages. Mds 9000 series
Also for Cisco 9124 - mds multilayer fabric switch: Specifications (2 pages), Datasheet (9 pages), Specifications (3 pages), Release Note (48 pages), Release Note (44 pages), Release Note (36 pages), Release Note (22 pages), Release Note (3 pages), Release Note (40 pages), Manual (16 pages), Hardware Installation Manual (36 pages)

Print Page
Cisco 9124 - mds multilayer fabric switch Configuration Manual
Figure 37 Rescanning disks

Setting MPIO load balancing policy

You must specify how the iSCSI targets will manage and share network traffic for the host. For both targets:
1.
Open the Microsoft iSCSI Initiator Properties window.
2.
Click the Targets tab.
3.
Select a target and click Details.
A Target Properties window opens.
4.
Click the Devices tab.
5.
Select the appropriate device and click Advanced.
A Device Details window opens.
6.
Select a load balance policy from the list
(Figure
38).
C-Series iSCSI
41