Cisco 9134 - MDS Multilayer Fabric Switch Configuration Manual - Page 25

Browse online or download pdf Configuration Manual for Switch Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 pages. Mds 9000 series
Also for Cisco 9134 - MDS Multilayer Fabric Switch: Specifications (3 pages), Release Note (48 pages), Release Note (44 pages), Release Note (22 pages), Release Note (3 pages), Release Note (40 pages), Release Notes (10 pages), Manual (16 pages), Hardware Installation Manual (36 pages)

Print Page

Presenting EVA LUNs to the iSCSI initiator

After the iSCSI Initiator connects to the EVA controller, the EVA recognizes the iSCSI Initiator WWPN that

was mapped from the C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module

(14/2),, or MDS 9216i switch as if it were a Fibre Channel HBA. The EVA can use the iSCSI Initiator

WWPN to create a host entry and present LUNs to the host entry.

NOTE:

This section describes conﬁguring LUNs on an EVA. For conﬁguring LUNs on other storage products,

refer to the procedures described in the product documentation.

The EVA is managed and conﬁgured with Command View EVA.

To create an EVA host entry:

Select the Storage Array icon and click the Hosts folder

Figure 14 Host Folder—Add host

Click Add host.

The Add a Host window appears

(Figure

15).

14).

C-Series iSCSI