Safety Information for the 350 Series Bridge
The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has adopted a
safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC
certified equipment. Cisco Aironet 350 series products meet the uncontrolled environmental limits
found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio according to the instructions
found in this manual and the hardware and software guides on the Cisco Aironet Series Wireless
Access Points and Bridges CD will result in user exposure that is substantially below the FCC
recommended limits.
• Do not touch or move the antenna while the unit is transmitting or receiving.
• Do not hold any component containing a radio such that the antenna is very close to or touching
any exposed parts of the body, especially the face or eyes, while transmitting.
• Do not operate a portable transmitter near unshielded blasting caps or in an explosive
environment unless it is a type especially qualified for such use.
• Do not operate the radio or attempt to transmit data unless the antenna is connected; otherwise,
the radio may be damaged.
• Antenna use:
In order to comply with FCC RF exposure limits, dipole antennas should be located at a
–
minimum distance of 7.9 in. (20 cm) or more from the body of all persons.
High-gain, wall-mount, or mast-mount antennas are designed to be professionally installed
–
and should be located at a minimum distance of 12 in. (30 cm) or more from the body of all
persons. Please contact your professional installer, VAR, or antenna manufacturer for proper
installation requirements.
Compliance Information for the 350 Series Bridge
Compliance information for the Cisco Aironet 350 Series Bridge is provided in the Cisco Aironet 350
Series Bridge Hardware Installation Guide.
10
Print Page