Byn-to HP21 7BQ Manual - Page 3

Browse online or download pdf Manual for Mobility Aid Byn-to HP21 7BQ. Byn-to HP21 7BQ 5 pages.

BYNTO LTD

Height Adjustment:

1. Remove Tri Walker from case.
2. Unfold frame: spread legs apart.
3. Push locking mechanism forward (toward front wheel) until it stops.
4. Remove the gray plastic end caps from the frame and discard them.
5. Insert chrome tube sections of left and right handlebars into their respective vertical frame
sections.
6. Adjust handlebars to user's height. DO NOT extend the handlebars beyond the knurled
(crosshatched) portion of the handlebars. Tighten adjustment knobs on both vertical frame
sections until the handlebars are secure.

Operation

Hand Brake: Squeeze hand brake to stop; release hand brake to walk. Ensure that both hand brakes
are squeezed at the same time to ensure proper braking. If only one hand brake is squeezed, only
one wheel will stop.
To Lock: Push hand brakes down to lock. Ensure that both left and right hand brakes are locked.
Always lock hand brakes when user is immobile.
Folding Tri Walker: pull locking mechanism back until it unlocks. Grasp push handles and push inward
to collapses Tri Walker.

Maintenance

For dust and dirt, wipe Tri Walker gently with damp, softy cloth.
Use a mild soap and water solution to clean, rinse with clear water, then dry with a soft cloth.
Never use organic solvents, abrasive cleaners or scouring pads on any part of (Please read all
Your Tri Walker braking system will periodically require adjustment. Release the locknut and
screw out the screw
the locknut. Repeat the operation on the other side
SAFETY GUIDELINES – please read before use
1. This product has a maximum user weight limitation of 250lbs.
2. Assemble Tri Walker as instructed to ensure safe use.
3. Make sure that all assembled parts are secure and all hardware is tightened before use.
4. If components are damaged or missing, contact your dealer immediately. DO NOT use substitute
instruction before use)
adjuster until the brake arm clears the wheel by approx 3mm retighten
Page 3
www.bin-to.co.uk
Tri Walker Instructions