Cisco BTS 10200 User Manual - Page 19

Browse online or download pdf User Manual for Switch Cisco BTS 10200. Cisco BTS 10200 35 pages. Softswitch

Print Page

Enable IRDP

This section discusses how to enable IRDP functionality on the Cisco BTS 10200 Softswitch and on the

network router.

Enable IRDP on the Cisco BTS 10200 Softswitch

Follow these steps to enable IRDP on the Cisco BTS 10200 Softswitch.

Note

Remove the defaultrouter file from /etc.

Step 1

There should be three default routes in the routing table. Remove all three of these with the following

Step 2

command:

Step 3

Execute the following command:

Edit S69inet and search and replace for rdisc -s with rdisc -s -f.

Step 4

Note

This will ensure that reboot will enable the irdp daemon.

Step 5

Put the following lines into the S68inet file:

OL-2906-01

C I S C O C O N F I D E N T I A L

You should already have the Cisco BTS 10200 Softswitch application software installed on the

system.

route delete net default <gateway address>

/usr/sbin/in.rdisc -s -f

if [ -f /usr/sbin/in.routed ];

then

\mv -f /usr/sbin/in.routed /usr/sbin/in.routed.org

Enable IRDP