BYOC 10-band graphic equalizer Instructions Manual - Page 9

Browse online or download pdf Instructions Manual for Music Pedal BYOC 10-band graphic equalizer. BYOC 10-band graphic equalizer 14 pages.

Print Page

Assembly

1. Install the jacks first. If you are looking down inside the enclosure, the mono jack goes on

the right side and the stereo jack goes on the left. Place the washer on the outside of the

enclosure. Use a 1/2" wrench to tighten.

2. Install the AC adaptor jack. The bolt goes on the inside. Use a 3/4" or 14mm wrench to

tighten.

3. Install the footswitch. The first bolt and metal washer go inside. The plastic washer and

second bolt go on the outside. It does not matter which side you designate as the "leading

edge" of the footswitch as long as you orientate it so that the flat sides of the solder lugs are

aligned in horizontal rows, not vertical columns.