Cisco C3850-NM-4-1G Manual - Page 9

Browse online or download pdf Manual for Switch Cisco C3850-NM-4-1G. Cisco C3850-NM-4-1G 15 pages.
Also for Cisco C3850-NM-4-1G: Installing (17 pages)

Print Page

Installing a Network Module

Interface

TenGigabitEthernet1/1/5

TenGigabitEthernet1/1/6

TenGigabitEthernet1/1/7

TenGigabitEthernet1/1/8

If you use a 4x10G breakout cable, the ports default to 10 G interfaces.

Table 11: C3850-NM-2-40G Module with 4x10G breakout cable

Interface

FortyGigabitEthernet1/1/1

FortyGigabitEthernet1/1/2

TenGigabitEthernet1/1/1

TenGigabitEthernet1/1/2

TenGigabitEthernet1/1/3

TenGigabitEthernet1/1/4

TenGigabitEthernet1/1/5

TenGigabitEthernet1/1/6

TenGigabitEthernet1/1/7

TenGigabitEthernet1/1/8

Removing a Network Module

Note

The switch complies with EMC, safety, and thermal specifications when a network module is present. If no

uplink ports are required, install a blank network module.

Procedure

Step 1

Attach an ESD-preventive wrist strap to your wrist and to an earth ground surface

Caution

Do not remove the network module with connected cables or installed pluggable transceiver modules.

Always remove any cables and modules before you remove the network module.

Action

Disregard

Action

Disregard

Configure this interface

Installing a Network Module

Removing a Network Module