Cisco Catalyst 2900 Series Hardware Installation Manual - Page 8
Browse online or download pdf Hardware Installation Manual for Switch Cisco Catalyst 2900 Series. Cisco Catalyst 2900 Series 47 pages. Xl modules
Also for Cisco Catalyst 2900 Series: Manual (19 pages)
Print Page
Key Features
Note
Key Features
Table 1-1
Catalyst 2900 Series XL Modules Features
Module
WS-X2931-XL
(1 1000BaseX port)
WS-X2932-XL
(1 1000BaseT port)
Catalyst 2900 Series XL Modules Hardware Installation Guide
1-2
1
Model Number
Description
WS-X2914-XL-V
4 autosensing 10/100 UTP ports
WS-X2922-XL-V
2 100BaseFX ports
WS-X2932-XL
1 1000BaseT port
WS-X2924-XL-V
4 100BaseFX ports
WS-X2931-XL
1 1000BaseX port
1. If you insert these modules into a Catalyst 2912MF XL (WS-C2912MF-XL) or
Catalyst 2924M XL switch (WS-C2924M-XL-A or WS-C2924M-XL-EN), they support up to
8192 MAC addresses on each switch. If you insert any of these modules into a
Catalyst 2916M XL switch (WS-C2916M-XL), they support up to 2048 MAC addresses on each
switch.
To use the ISL and IEEE 802.1Q trunking features, you must enable
them by using the Enterprise Edition Software. These features
cannot be used with the standard edition software.
Table 1-1 describes the module features in detail.
Feature
Hot-swappable
•
Management through an SNMP management station, the Cisco IOS
•
command-line interface (CLI), or the web-based Visual Switch Manager
(VSM)
Autonegotiation of duplex mode and flow control
•
IEEE 802.1Q VLAN trunk support
•
•
ISL trunk support
Up to 8192 MAC addresses on each modular switch
•
Chapter 1
Overview
78-5912-03