DigiSender TV DG258-2RX Installation Manual - Page 10

Browse online or download pdf Installation Manual for Transceiver DigiSender TV DG258-2RX. DigiSender TV DG258-2RX 20 pages. Twin input 5.8ghz wireless av sender system with 2 receivers

Print Page

DG258-2RX - DigiSender HQ2RX - Twin Input 5.8GHz Wireless AV Sender System with 2 Receivers

Using your DigiSender®

Basic Functions

Turning the DigiSender® On and Off

To turn the DigiSender® On, press the power button on the front of the Transmitter and Receiver. The

power button will light up blue to indicate that the unit is switched on.

To turn the DigiSender® Off, press and hold the power button on the front of the Transmitter and

Receiver for approximately 3 seconds.

Alternatively you can turn the units On and Off by pressing the power button on the DigiSender®

Remote Control.

Selecting the Input

To select Input 1 (the source device attached to DigiConnector™ 1) press the blue power button on

the front of the Transmitter once.

Input LED 1 will light up red to indicate that the unit is set to input 1.

To select Input 2 (the source device attached to DigiConnector™ 2) press the blue power button on

the front of the Transmitter a second time.

Input LED 2 will light up red to indicate that the unit is set to input 2.

Alternatively you can select the Input by pressing the button labelled 'Input 1' or 'Input 2' on the

DigiSender® Remote Control at the transmitting location.

Page 10

Please read the instructions carefully prior to installation